LED Remote Controller Milight FUT006 Brightness Adjustable 2.4G RF 4 Zones

Description: LED Remote Controller Milight FUT006 Brightness Adjustable 2.4G RF 4 Zones Rotating Wheel CCT Characteristic functions of the Mi-Light remote control – FUT006 Dimming and brightening of connected LED lighting Control each zone separately All zones can be turned on / off at the same time Two operating modes – mono and CCT (change in colour temperature) Immediate brightness reduction (night mode) Features of the 4-zone Mi-Light remote control – FUT006 Four zones to use Battery powered (2×1,5V AAA) Radio communication with receivers (2.4GHz) Cooperation with a Wi-Fi controller (additional option) The possibility of expanding the installation at any time The basic communication with the receiver takes place by means of a radio route. Obtaining an optional control by connecting to a Wi-Fi network, which allows control of lighting with the help of mobile devices (eg smartphone or tablet), is available only after using the appropriate Wi-Fi module. Available cooperating devices can be found in the table below or in the category “related products”.   Table 1. Cooperating devices with LED remote control – Mi-Light – FUT006 Product code Product name FUT036 Mi-Light 2.4GHz multi white wireless WiFi dimmer FUT036 FUT035 Mi-Light 4-zone colour temperature dual white LED strip controller FUT035 FUT060 Mi-Light 6W dual white LED downlight FUT060 FUT061 Mi-Light 12W dual white LED downlight FUT061 IBOX1 Mi-Light WiFi iBox smart light iBox1 IBOX2 Mi-Light WiFi controller iBox2 Full control – cooperation with receiving devices Each of the transmitting devices of the Mi-light LED driver series is characterized by the ability to assign not only one device to it. Built-in invisible under the housing electronics works on the principle of a receiving device thus connecting to our LED driver. One zone in the remote control is also not an obstacle because we can assign to it many devices such as LED bulbs, downlights or receivers cooperating with the given model. Many devices do not interfere with each other and make this connection easy to use and easy to control. Below you will find a full table showing all the devices that work with the given model. Construction of the remote control – the control was not so easy Depending on the transmitting device model, which occurs mainly as a remote controller that connects via radio to the receiver, we can obtain various control functions. The tactile dial located in the centre has the main control function, it is through it that we can, among others, quickly change the intensity of light or the colour temperature in the room. At the very top of the remote controls, there are buttons responsible for switching on / off all available zones in our LED installation. Buttons responsible for switching on/off a given zone are located on the bottom of the device arranged next to each other. The construction of multi-zone pilots is constructed in a simple way, making access to the most important functions convenient. The whole room at your fingertips – zone control Some of the Mi-Light transmitting devices provide access to multiple zones, fully controlled by one device. The use of such a procedure greatly facilitates the use of a created LED installation in a given room, while allowing the future development of lighting at any time, when we do not need several zones in our installation, just another pairing of the connected receiver with LED lighting with our device receiver to the next zone. An interesting feature is the ability to program an unlimited number of receivers to a given zone, the condition, in this case, are only the output parameters of the receiver. Mi-Light 2.4GHz 4-zone rotating wheel remote controller FUT006 specification Application For monochrome installations (single colour) Number of supported zones/channels 4 The way of control radio Type of control buttons The range of radio communication up to 30 meters in the open area Powering the remote control 2x pcs. 1.5V AAA battery Signal modulation GFSK Transmission type One-way Frequency of transmission 2.4GHz Power consumption in operating mode 6dBm Power consumption in standby mode 20uA Colour White Cooperation with receivers See ‘Product description table no. 1’ IP rating IP20 Retome dimensions 53mm x 22mm x 110.5mm (width length height) Declarations RoHS, CE What you will receive: 1 x LED Remote Controller Milight FUT006