The Mytee Lite 8070 Upholstery Heated Carpet Extractor is specifically designed for upholstery cleaning and spot treatments. Compact yet powerful, it’s the go-to machine for professional restorers, carpet cleaners, and car detailers who need reliable heated extraction on the move or in the workshop. Inside the durable housing, the Mytee Lite 8070 features: Three-Stage Vacuum Motor – Provides strong suction for deep cleaning and faster drying times. 120 PSI Pump – Ensures proper upholstery cleaning and rinsing. 1,000-Watt Heater – Heats solution temperatures up to 99 °C as it passes through for consistent hot-water cleaning power. Dual 15-Litre Tanks – Separate solution and recovery tanks offer the perfect balance of capacity and portability. Easy Mobility – Four caster wheels plus a sturdy handle and metal chemical basket for easy transport and access to supplies Operating Directions Setup: Fill the solution tank (up to 15 L) using a bucket or the included faucet fill hose. Connect the upholstery tool’s vacuum hose. Attach the quick-connect fitting for the solution line. Plug the power cord into a grounded outlet. Priming and Heating: Switch on the pump and direct the upholstery tool into the solution tank. Pull the trigger until water flows steadily to prime the pump. Switch on the heater and allow 7–10 minutes for the system to warm. Begin cleaning once the heater indicator shows ready (no need to wait for the entire tank to heat). Cleaning Procedure: Apply a suitable pre-spray (e.g. IAQ Pro Firefly) to the surface and allow a 5-minute dwell time. Extract using one wet pass (spraying solution) followed by two dry passes (vacuum only) to prevent over-wetting and maximise suction. Ideal for cleaning car seats, upholstery, and spot removal on vehicle interiors. Emptying and Maintenance: After cleaning, drain the 15-litre recovery tank using the rear drain cap or the included drain hose. Rinse and dry tanks as required before storage.
